10
Main Power Connection
1. Insert the DC plug of the AC adapter cord into the DC INPUT Jack at the back of the
turntable.
2. Plug the AC adapter into a normal power outlet.
NOTE:
Do not plug the AC power adapter into a power outlet before all turntable
assembly is completed. Before turning on turntable power, recheck all connections to
make sure they are correct and secure. Always turn off the turntable before connecting
or disconnecting from power.
Playing a Record
1. Before playing a record
1.1 Pull the protector straight forward to remove it.
NOTE:
Applying a downward force may
cause the stylus to come off the body. Only
low volume will be output if the stylus has
come off, or is about to come off, so refer to
“Replacing the stylus” to reattach the stylus
correctly.
Protector
1.2 Place the record on the felt mat so that the center hole aligns with the spindle.
45 RPM Adapter
If playing a 45 RPM record with a large center hole, attach the 45 RPM adapter.
