background image

15

• Try to aim for a maximum peak of around –6 dB, which corresponds to

around 0.5 on the 

waveform

. You can always boost the level later with 

Effect

> Amplify...

 or 

Effect > Normalize

... after you have completed editing.

5. Recording

Then, ignoring any instructions in the manufacturer's guide to select "stereo mix", 
simply press the 

Record

 button   in 

Transport Toolbar

 to start recording from the 

turntable.

6. Recording, editing and exporting

Once your USB turntable is set up and working properly, go to the 

Basic Recording, 

Editing and Exporting

 section of Audacity’s  

Tutorial - Copying tapes, LPs or 

MiniDiscs to CD

 for instructions on how to:

• make and edit your recording
• export it to an audio file
• import it to iTunes or Windows Media Player
• burn it to CD

Audacity’s reference links

:

Basic Recording, Editing and Exporting :

 

https://manual.audacityteam.org/man/

basic_recording_editing_and_exporting.html

Tutorial - Copying tapes, LPs or MiniDiscs to CD :

 

https://manual.audacityteam.

org/man/tutorial_copying_tapes_lps_or_minidiscs_to_cd.html 

Care

Turntable Body

• When the turntable body is dirty or dusty, first disconnect the AC adapter and then

wipe off the dirt and dust with a soft, dry cloth.

• Do not use benzenes, thinners, etc.
• When storing the product for a long time, disconnect the AC adapter from the

outlet and wrap the product in plastic; do not allow it to become damp; the drive
belt should be removed to prevent unequal stretching.

Tips for Stylus Cleaning

• If dirt and grime are stuck to the stylus tip, clean it

with a commercially sold brush.

• We recommend using a stylus cleaner (not

included) if the stylus tip is considerably dirty.
Clean the stylus tip by moving the brush from the
rear to the front of the stylus tip.

Summary of Contents for 471NA-0010


























Reviews: