8
9
NOTE:
In order to achieve the best sound, it is advised to set the turntable volume
to a minimal level. Then the turntable's audio will be played back through your own
amplifier, speakers, etc.
NOTE:
The RCA Jacks are not designed to be connected directly to the
passive/unpowered speakers on LINE mode. If connected to the passive
speakers, there will be no sound.
Connectable device being
used
Device with phono input
Device without phono
input
Position of the Phono &
Line Out Switch
PHONO
LINE
Where to connect RCA
audio cable
Phono input jack and
ground (earth) terminal
of connected equipment
AUX or line input jack of
connected equipment
1.Setting Phono & Line Out Switch
This product has a built-in phono equalizer function. You can use the product even if
you do not have a phono amplifier or connectable equipment with a built-in phono
amplifier.
Use the
Phono & Line Out Switch
to set the output, as shown below.
2. Connecting the device
Align the settings for the Phono & Line Out Switch and connect the
RCA audio cable to an input jack that is compatible with the connectable
equipment you are using (amplifier, active speakers, etc.).
• The RCA audio cable's red jack is for the right (R) channel, and the white jack is
for the left (L) channel.
RCA wired connection
Active Speakers
or
Amplifier
AUX OUT
R
L
AUX
IN
LINE OUT
PHONO
USB-PC
DC IN
15V
POWER
OFF
ON
To outlet
AUX
L
R
PHONO
L
R
With PHONO
Without PHONO
To outlet
Connectable equipment
(Amplifier, etc.)
With PHONO
Without PHONO
