1
Power Option
For USB
Power Cable
For use when no
USB port is available
on the TV.
Supplied USB
100-240V Power Adapter
5’ USB Power Cable
3
5’ USB Power Cable
20’ Coaxial Cable
To ANT/IN or CABLE IN
on back of TV
Detailed
View
To USB
on back of TV*
A.
Before your connection, please read the below names and use for the antenna
parts(as shown in figure
1
).
B.
Connect the coaxial cable from the antenna to the
ANT/IN
or
CABLE IN
port on
the back of your TV (as shown in figure
2
). Note: For TV's that require a tuner box,
connect the coaxial cable from the antenna to the tuner box's
ANT/IN
or
CABLE IN
port. See the“Final Configuration” Illustrations below for both connection options.
C.
The amplifier requires power to operate properly. Plug the round end of the
amplifier’s 5ft long USB power cable into the amplifier (as shown in figure
1
).
Then insert the USB plug into an open USB port on the back of your TV (see
figure
2
). If no USB port is available, use the supplied power adapter to power
the amplifier through any standard 110V outlet (see this option in figure
3
).
Back of TV
2
From 20’
Coaxial Cable
From
5’ USB Power Cable
ANT/IN
CABLE IN
ANT/IN
USB
Final configuration when connected to
the HDTV with built in digital tuner
Digital
Antenna
USB adapter
5V 100mA
HDTV
Inline Amplifier
Inline Amplifier
Inline Amplifier
Final configuration when connected
through a digital set-top box
Set-top Box
Digital
Antenna
USB adapter
5V 100mA
Traditional TV
1. Connect Antenna to TV or Set-top box
USB Power Cable shown using optional 100-240V power adapter
*
*
USB Power Cable may also be plugged into any available USB port on HDTV as well.
On/Off
A
n
tenna
TO
T
V DC
+
-
On/Off
A
n
tenna
TO
T
V DC
+
-
On/Off
A
n
tenna
TO
T
V DC
+
-
Antenna
Inline Amplifier
*
Switch-on: Green light
Switch-off: Yellow light
On/Off
A
n
tenna
TO
T
V DC
+
-
