TOWER SYSTEM LCC44/LCC84 WALL INSTALLATION
Figure 6. Removing the R-clip from the clevis pin.
•
Remove the R-clip (hairpin cotter) from the clevis pin that serves
as a pivot axle for the tilt mechanism, and remove this clevis
pin. Put the pin and the R-clip aside, as they will be required to
complete the installation.
Figure 7. Removing the clevis pin from the tilt
mechanism.
•
Tilt the bracket outwards from the mounting plate until it comes
to a stop at its maximum tilt.
Figure 8. Removing the bracket from the mounting
plate.
•
The bracket should come away easily towards the bottom of the
mount.
