www.100x100chef.com
Cocina Sin Límites, S.L.
26
ENG
Troubleshooting
PROBLEM
CAUSE
REMEDY
Grinding takes more time a. Overload in the drum.
b. Incorrect wiper guide.
c. Low voltage.
d. The top lock not tightened fully.
a. Place them in the right
position.
b. Correct the position.
c. Check the input voltage.
d. Tighten the top lock.
Grinder gets more heated
up than usually
a. Overload in the drum.
b. Low voltage for power supply.
c. Thick paste formation in the
drum.
d. Grinder is near a heat source.
e. Ventilation of the grinder is
blocked.
a. Take out the excess quantity.
b. Switch off grinder and wait
until the voltage stabilizes.
c. Add water as required.
d. Change the position of
grinder/heat source.
e. Remove the blockage.
In case of any doubts contact the nearest 100%Chef Distributor.