8
--Insert the handle bar post (4) into the tube as shown after
Loosening and pulling out the Knob (22), and then select a
desired height to align the hole, and then fix it tightly by the
knob (22).
--Fix the handlebar (5) onto the Handlebar post (4) tightly
with washer
（
10
）
and knob(9) .
Note: Do not exceed the mark “stop”.
Caution:
Now the equipment is completed assembled, if you find it is not leveled on the floor
you can adjust it by the adjusting pad
（
44
）
. Make sure you have tightened all
th-e screws and nuts well before beginning your workout.
COMPLETE EXPLOSION DRAWING
5
9
4
2
2
1
0
1
