background image

。 

) 

。 

) 

the left and right sides of the breath must rotate the same. 

2.Adjust the running belt to the middle 

2.1When you use a treadmill, due to the different forces used by the two feet when 

running, the pressure on the running belt is unbalanced, causing the running belt to 

deviate from the center. This deviation is normal when no one is running. When the 

running belt runs up, it will return to the center. If it cannot return to the center, you 

need to adjust the running belt back to the center. 
2.2.How to adjust the running belt to the middle? 

) 

。 

1  Run the treadmill without load and adjust the speed to 6KM/H 

) 

。 

2  Observe the distance from the running belt to the left and right side bars 

 

If deviating to the left, use an Allen wrench and turn the left screw 1/4 turn clockwise; 

If deviating to the right, use an Allen wrench and turn the right screw 1/4 turn 

clockwise; 

If the walking belt is still not in the middle, repeat the above movements until it is 

adjusted to the middle 

3  After adjusting the running belt to the middle, adjust the speed to 1KM/H and 

 

observe the deviation of the running belt and the smooth running situation. If there is a 

deviation, repeat the running steps 

4  Warning! Do not over tighten the drum! This will cause permanent bearing damage! 

 

If the above steps do not work, you need to tighten the running belt again. 

Summary of Contents for 30T




















Reviews: