To Use Auto Scan to Create Slices:
1.
From the Waveform screen for the slicer pad, touch the menu item with the
three dots “. . .”. This will display the Waveform Slicing menu.
2.
Touch Scan and then use a control knob to select a Threshold percentage for
the sensitivity of the scan. The lower the threshold, the higher the number of
slices that will be created. Touch OK when you are ready to scan. (You can
touch anyplace outside of the Threshold field to cancel the scan.) Bitbox mk2
will detect and create slice points in the file automatically. The slice points are
shown as pink horizontal lines with a small pink square near the bottom.
To Use Slice to Grid:
1.
From the Waveform screen for the slicer pad, touch the menu item with the
three dots “
. . .
”. This will display the Waveform Slicing menu.
2.
Touch Grid and then use a control knob to select the number of Slices to
create. Touch OK when you are ready to scan. (You can touch anyplace
outside of the Slices field to cancel the scan.) Bitbox mk2 will automatically
divide up the WAV file evenly into the number of slices you specified. The
slice points are shown as pink horizontal lines with a small pink square near
the bottom.
You can adjust the results of the slice to grid or auto scan by manually adding or
removing slices to get the slices that match your creative vision.
scan or slice to grid. When you use auto scan, bitbox mk2 uses an internal algorithm to
decide where to place the splits. You can control the sensitivity of the algorithm. When
you use slice to grid, you define a fixed number of slices and bitbox mk2 will create
splits that evenly divide the WAV file into the specified number of slices.
To Manually Create or Remove Slices:
1.
On the Waveform screen for the slicer pad
touch the menu item with the three dots “. . .”.
This will display the Waveform Slicing menu.
2.
Use touch gestures to move the waveform so
the fixed cursor position (the vertical white line)
is at the position where you want to add
another slice point. Touch Split to create a slice
point. The slice point is shown as a pink
horizontal line with a small pink square near
the bottom.
3.
Use touch gestures to move the waveform so the fixed cursor position (the
vertical white line) is on or near a slice point that you want to remove. Touch
Join to remove the slice point.
You can have as many or as few slices as you want.
Waveform Slicing Menu
Page 35 of 82
Copyright 1010music LLC 2020
Bitbox MK2 1.0.8 User Manual
