Parameter
Value
Explanation
Launch
Mode
Trigger
This will cause the WAV slice to play from beginning to end
when a trigger is received. Other values will work, but let’s
use this for the example.
Loop Mode
OFF
We will turn off looping for this example.
Slice
3
This does not impact how the Keys screen plays the slices.
Slice Seq
None
We do not want to use the Slice Sequencer in this example.
PlayThru
OFF
If we turn this on, playback will continue past the end of the
triggered slice into the next slice.
3.
On the Pads screen, with the slicer pad
selected, push HOME and then touch Keys to
go to the Traditional Keyboard screen.
4.
Play C2 on the Traditional Keyboard screen.
You will hear that slice 1 is played.
5.
Play D#2 and slice 4 will be played. Keys C2
and up are now mapped to Slices 1 and up for
playback.
6.
Push the INFO button to go to the Grid
Keyboard screen. Bitbox mk2 will display
numbered squares in the grid for each slice in
the WAV file. Use the arrows at the top of the
screen to access additional octaves if needed.
Bitbox mk2 will display one square on the grid
for each slice in the pad.
7.
Touch a numbered square on the grid to play
that slice.
8.
Touch STOP at the top of the screen to stop
playing all slices. (The SLICE button next to
the STOP button does not do anything, it is just
a reminder that this is a slice pad.)
Grid Keyboard for Slices
Copyright 1010music LLC 2020
Page 52 of 82
Bitbox MK2 1.0.8 User Manual
