8
5.4 Transportation.
Please protect the housing during transportation. It is recommended to remove the handle, and shutter
extension, and wrap the camera in foam or bubble wrap.
5.5 Accidents.
The impact resistance of the housing is excellent. However after an accident the alignment of the housing
may have been altered. Therefore in the event of your housing suffering an impact force, e.g. being
dropped, it is essential that you do not use the housing for diving. Please return the housing immediately
for service and put a note inside to indicate the nature of the accident, so that the severity can be assessed.
6. Service
To ensure the continued performance of your housing, it should be serviced every year, or after every 200
dives whichever is earlier. Please note the terms for servicing the housing posted at our website. A full
service will include:
l
Inspect all components for wears or damage (report if repair
necessary),
l
Clean all sealing surfaces,
l
Replace all O-ring seals,
l
Hydrostatic pressure test to 10 Bar.
Note: Replacement of damaged components may
require additional cost.
7. Warranty
The warranty is valid within two years from the date of first purchase. The warranty applies only
to the housing itself.
10BAR does not accept any liability either implicit or otherwise for
any equipment housed inside,
or used together with the housing.
In the event of the
housing flooding
within the period of warranty, 10BAR will repair or replace the housing. Please
note that disassembly of the housing will invalidate warranty. Please fill in the
information below,
and return a copy to 10Bar Underwater Housing at the address below, to validate the warranty.
