background image

7

. Warranty 

The warranty is valid within two years from the date of first purchase. The warranty 

applies only to the housing itself. 

10 BAR does not accept any liability either 

implicit or otherwise for any equipment housed inside, or used together 

with the housing. 

In the event of the housing flooding within the period of warranty, 10 

BAR will repair or replace the housing. Please note that disassembly of the housing will 

invalidate warranty. Please fill in the information below, and return a copy to 10 Bar 

Underwater Housing at the address below, to validate the warranty. 

 
Housing Type : 

 

Date of Purchase : 

 

Serial Number : 

(Labeled inside housing)

 

 

Dealer : 

 

Owner’s Name : 

 

e-mail : 

 

Address:  
Tel : 

 

Fax : 

 

 

Office & Showroom: 

Unit C, 2/F., Wing Hin Factory Building, 31-33 Ng Fong St., 
San Po Kong, Hong Kong. 

Tel: (852) 2573 3228 Fax: (852) 2811 9180. 

Email: 

service@10bar.com 

Web site: http//www. 10bar.com 

 

Please keep this document for future reference 

(Note: due to continuous improvement the latest model housing may differ slightly form those described in this 
document) 

 
(Copy to be returned to 10 Bar Underwater Housings) 

 

Summary of Contents for EOS XTi EOS400D












Reviews: