background image

11

12

                                                        Trouble  Shooting                                                                                                                                 

The reading is higher than measuring range, please 
redo a measurement.
The reading is lower than measuring range, please 
redo a measurement.

Out of operating condition.

Device self-diagnostic error, please contact the 
distributor.

                                                            FCC  Statement                                                                                                                    

POTENTIAL FOR RADIO/TELEVISION INTERFERENCE

This product has been tested and found to comply with the limits for 
a Class B digital device, pursuant to Part 15 of the FCC rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. The product generates, uses, 
and can radiate radio frequency energy and, if not installed and used 
in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If the product 
does cause harmful interference to radio or television reception, 
which can be determined by turning the product on and off, the user 
is encouraged to try to correct the interference by one or more of the 
following measures:

● Reorient or relocate the receiving antenna.
● Increase the separation between the product and the receiver.
● Connect the product into an outlet on a circuit different from that to 

which the receiver is connected.

● Consult the dealer or an experienced radio/TV technician for help. 

REV. 20171206        PN.828130XXXX

Changes or modifications not expressly approved by the party 

responsible for compliance could void the user's authority to 
operate the equipment.

                        

     

Limited  Warranty                                                                                                                                  

Warranty: 

The device itself (battery excluded) comes with one year warranty 
from purchase date if it is operated under normal circumstances 
without evidence of tampering. See exclusions below.

Warranty exclusions:

1. If user does not properly operate the device according to the 

instructions as described in this manual.

2. If the device shows signs of tampering or attempted modification.

3. Improper handling, such as dropping, liquid or cleaner damage. 

4. Natural disasters (such as fire, flood, earthquake, lightning strike).

5. If you do not have a receipt or proof of purchase showing date of 

purchase.

                                                Lot  Number  Information                                                                                                             

LOT NO. (YYMM) on the device label means the year and month 

of  manufacturing.  For  example,  "1712"  means  the  device  was 

manufactured in December, 2017.

www.180innovations.com
Made in China

Summary of Contents for KI-8130








Reviews: