Wall-mounting
-7-
Mounting soundbar on a wall
In order to prevent injuries,the sound base device must be
securely fasten to the wall in accordance with the below
installation instructions.
1.Drill the two holes(about 6mm diameter ) in the wall and keep
the distance between drill holes of the sound base is 500mm.As
shown in the picture on the right(diagram 1).
2. Insert the two plugs supplied into two drilled holes and then
insert two screws supplied into two holes and tighten.As shown in
the picture on the right(diagram 2).
3. Take care to leave 4 mm between the screw heads and wall.As
shown in the picture on the right(diagram 3).
500mm
4mm
Diagram 1
Diagram 2
Diagram 3
