10
11
5. The indicator will stop flashing and become solid if pairing is successful.
6. The playback device’s music can now be played through the turntable’s speakers
using Bluetooth.
NOTE:
• If problems arise, hold the / Pair button to reconnect again.
• If it is necessary to connect another device, hold the / Pair button to reconnect.
• If a mobile call is received, the music will stop playing until the call ends.
LISTENING TO A USB DEVICE
Loading a USB Device (Supports MP3 Files)
1. Connect to power and press the
button to turn on the turntable.
2. Insert a USB device into the USB port.
3. Turn on USB mode by pressing the Function button until the USB indicator shows
on the display. The USB will auto play and the track number will show on the
display. If necessary, press the button to begin playing the USB’s music.
4. Make sure the Volume control dial is in the correct position.
5. Before removing the USB device, press the button to stop playback first.
Play/Pause Control
1. When a USB memory stick is connected, press the button to play the USB’s
music.
2. Pause playback temporarily by pressing the button again. Music playback will
be paused and the current track number will flash on the display.
3. Press the button again to resume playback.
Stop Playback
Press the button to stop playback.
Skip Track
During playback, press the
/
buttons to skip to the previous or next tracks.
During playback, press the +10 button to skip the next 10 tracks.
High-Speed Music Search
1. During playback, press and hold the USB Skip/Search
/
buttons to skip/
search through the current track at high speed in a forward or backward
direction.
2. When the USB Skip/Search
/
buttons are released, normal playback speed
will be immediately resumed.
Repeat Function
1. During disc playback:
• Press the Repeat button once and the “REP 1” indicator will show on the display.
The turntable will then keep repeating the currently playing track.
• Press the Repeat button three times and the “REP ALL” indicator will show on the
display. The turntable will play all songs repeatedly.
• To cancel all repeat functions, press the Repeat button repeatedly until the REPEAT
indicator on the display turns off.
LISTENING TO AUX IN (LINE IN/AUDIO IN)
1. Plug a 3.5mm audio cable into the 3.5mm port of the mobile device or the Aux
out/Line-out/Audio of the MP3 or MP4 player.
2. Plug the other end into the AUX IN jack on the turntable.
3. Make sure the turntable and media device are turned on.
4. Press the Function button until the “AUX and AU” indicator confirming AUX mode
has been selected shows on the display.
5. Set your media device to start playing.
6. This setup will allow external device sound to be broadcast through the turntable.
LISTENING TO AUX OUT (LINE OUT/AUDIO OUT)
1. Audio from the turntable can be run through a home stereo system, television or
other stereo source using the AUX OUT RCA Jacks.
2. To make this connection, you need a standard RCA cable. Plug the red and white
connectors on one end of the cable into the red and white AUX OUT RCA Jacks
on the rear of the turntable. Plug the other end of the cable into the AUX INPUT
Jacks (LINE INPUT/AUDIO INPUT) of your selected device.
3. Operate the turntable as usual.
NOTE:
You can still listen to the turntable when using the Audio Output feature.
LISTENING TO A CASSETTE
Loading a Cassette Tape
1. Connect to power and press the button to turn on the turntable.
2. Turn on Cassette mode by pressing the Function button until the “TAPE and tAP”
indicator shows on the display.
3. Insert the cassette tape into the cassette slot. The side of the cassette you wish to
listen to or record onto should be facing up.
Playing a Cassette Tape
1. When a cassette tape is inserted, its music will start playing after a few seconds.
