background image

COUNTER MEMORY

Use this feature to memorize the beginning point that
you want to return to. And you can search it easily by
rewinding or fast forwarding.

Be sure to check that the "PWR." and the "VCR"
indicators are both on.

Turn on the TV and set the TV to channel
3 or 4. Now set the CH3/CH4 switch on
the back of the VCR to match the channel
selected on the TV.

This feature only works with a prerecorded tape.

1

Stop tape at your desired point

Insert a prerecorded tape. Rewind or fast forward the
tape to the beginning point at which you want to mark.

2

Reset the counter to 0:00:00

Press the COUNTER RESET button on the remote con-
trol. If necessary press the COUNTER RESET button
again to reset the counter to 0:00:00.

3

Select the Counter 
Memory mode

Press the COUNTER MEMORY
button on the remote control until
"M" appears on the TV screen.

The COUNTER MEMORY button does not function
if the Auto Repeat mode is set to [ON]. In this case,
set the Auto Repeat mode to [OFF].

4

Begin recording or playback

Press the RECORD or PLAY button.

Press the STOP button when recording or playback is
completed.

5

To activate the Counter Memory

Press the REW (or F.FWD) button, the VCR will stop
automatically when the counter has returned to approxi-
mately 0:00:00.

NOTE:  The displayed time will not change during

blank portions on the tape.

TO EXIT THE COUNTER MEMORY

Press the COUNTER MEMORY button on the remote
control so that "M" disappears from the TV screen.

On more information concerning the on screen display,
please refer to page 17.

SPECIAL PLAYBACK

Be sure to check that the "PWR." and the "VCR"
indicators are both on.

Turn on the TV and set the TV to channel
3 or 4. Now set the CH3/CH4 switch on
the back of the VCR to match the channel
selected on the TV.

AUTO REPEAT PLAYBACK

The VCR has the auto repeat function that allows you
to repeat a tape indefinitely without touching the PLAY
button.

Make sure to insert a prerecorded tape.

 1

Select main menu

Press the MENU button.

2

Select "AUTO REPEAT"

Press the PLAY/

 or STOP/

 button to point to

"AUTO REPEAT".

3

Begin Auto repeat playback

Press the F.FWD/

B

 button so that [ON] will appear next

to "AUTO REPEAT" on the TV screen.

When in Stop mode, Repeat playback mode will start
automatically. 

If the on-screen menu still remains, press the RE-
SET/EXIT button to exit the menu.

Once you select the Auto Repeat mode, it stays in
effect even after you turn off the VCR.

The COUNTER MEMORY button does not function
if the Auto Repeat mode is set to [ON]. In this case,
set the Auto Repeat mode to [OFF].

To stop playback, press the STOP button.

M 0:00:00

CH3

CH4

[Back of 
the VCR]

CH3

CH4

[Back of 
the VCR]

1B14

H7942

- 25 -

EN

Summary of Contents for DTK5400HF





































Reviews: