10
E
Battery Installation
M5 Stuart Tank:
IMPORTANT!
Use only a 12 Volt (7.0 Amp/Hr.) battery. Use of any other battery will damage your
M5 Stuart Tank. Make sure that you charge the battery for at least 18 hours using the enclosed 12
Volt charger before operating your M5 Stuart Tank for the first time. Charge the battery for at least
14 hours after each use of the M5 Stuart Tank. Never charge the battery longer than 30 hours.
Failure to follow these instructions may damage your battery and will void your warranty.
1
•
Switch the power to
“
OFF
”
.
•
Using a Phillips screwdriver, loosen the screws from the battery hatch. Open the battery hatch
from the battery compartment.