TM
ROOF TOP TENT USER MANUAL
Thank you for purchasing a 23 ZERO Roof Top Tent
Congratulations on your purchase of a 23ZERO Roof Top Tent. We strive to provide you with the
ultimate camping experience. Your Roof Top Tent mounts directly to your roof rack or aftermarket
roof bars. It opens and is fully setup in just a few minutes. As well as our innovative LST fabric,
your roof top tent is made with durable materials and high-quality fabrics that provide excellent
water and wind protection.
Most of the components have been pre-assembled with the exception of attaching the ladder
brackets and ladder to the base of the tent. The 1400 wide and 1600 wide tents also require the
mounting channels be attached. The orientation of these channels is dependent on your setup
preference, see “
Attaching Mounting Channels”
Tent setup is composed of unpacking, attaching mounting channels to the base of the tent,
attaching the ladder, sliding and zipping the tent cover, and then mounting your tent onto the roof
rack or roof bars.
Note:
During set up and first use, some aluminium swarf may be present inside your roof top
tent. We make every possible attempt to expel and vacuum all aluminium swarf, however, with
vibrations caused by logistics some residual may dislodge and reappear. It is advised to remove
and clean these during first set up.
PLEASE READ ALL INSTRUCTIONS PRIOR TO INSTALLING
1
CONTENTS
Hardware & Accessories
Safety & Warnings
2
3
Tent orientation
Attaching ladder
Attaching mounting channels
Fitting to roof rack
5
6
6
7
Hardware identification chart
4
Ladder adjustment
Warranty
Attaching optional annex
Closing and storage
9
10
11
12
Fitting transit cover
11
Using the roof top tent
7-8
