![background image](http://html1.mh-extra.com/html/25-seven/pdm-ii/pdm-ii_user-manual_3044369005.webp)
Audio Input
Audio input options include Analog, AES67, Livewire, and AES3. The up/down arrows scroll through the
options. In this and in subsequent edit screens, the Checkmark button accepts and applies any changes
while the X button cancels without saving.
Figure 2 - Audio input screen
AES67 Receive Channel
When using an AES67 audio source, the multicast address of the receive channel is set here. The up/down
arrows change the number by a value of 1, and the left/right arrows navigate between fields.
Figure 3 - AES67 receive address
Livewire Receive Channel
When using a Livewire audio source, the receive channel is set here. The up/down arrows change the
number by a value of 1, and the left/right arrows change the channel number by a value of 100.
Figure 4 - Livewire receive channel screen
Input Sensitivity
When using an analog audio source, this value should be set to the absolute loudest level PDM II will see in
your installation. The up/down arrows change the value. The "L" and "R" values represent the resulting
digital levels for the incoming analog signal and can be used along with an externally generated test tone to
adjust the sensitivity settings.