106 Industrial Installation Manual Rev. A-1
8
3.
GAS CONNECTIONS
The port labeled INLET and OUTLET are for connecting ¼" O.D. tubing. Be sure that
the sampling point is in a location where only the gas sample is directed to the
instrument and not any liquid or particulate matter.
CAUTION: USE ONLY MATERIALS SUITABLE FOR OZONE SERVICE. CONSULT
WITH 2B TECHNOLOGIES FOR ADVICE ON MATERIALS.
CAUTION: EXPOSURE TO OZONE IS HAZARDOUS. ENSURE THAT ALL GAS
CONNECTIONS ARE TIGHT AND THAT NO LEAKS EXIST.
4.
MAINTENANCE
The Industrial enclosure requires minimum maintenance. Inspect the enclosure for
signs of leaks or damage. Clean the polyester surface with an appropriate cleaner.
CAUTION
: Do not use abrasive cleaners on the window.
For the Model 106 instrument itself, refer to the Ozone Monitor user manual for the
recommended maintenance and service procedures.
