Panic alarm function / vehicle finder alarm
Press the button
to deter potential thieves or to find the vehicle.
The alarm signal will sound for 30 seconds without interruption; as
soon as you press the button
again, the alarm signal is switched
off. The other settings are not interrupted, however, and the
panic/vehicle finder alarm is automatically reset.
Setting the sensitivity of the shock sensor with the remote
control
Press the buttons
and
simultaneously and a confirmation
tone will sound once (this tone is distinguished from the signal when
the alarm system is switched on and off). When the confirmation
tone sounds once, the lowest sensitivity level is set. When you
press
and
a second time, the confirmation tone will sound
twice and thereby show that the medium sensitivity level is set.
Press
and
a third time and the confirmation tone will sound
three times and indicate that the highest sensitivity level has been
set. In order to return to the original setting, press
and
. The
original setting is the lowest sensitivity level.
Setting the sensitivity of the voltage sensor with the remote
control
Press the buttons
and
simultaneously and a confirmation
tone will sound once (this tone is distinguished from the signal when
the sensitivity of the shock sensor is set). When the confirmation
tone sounds once, the lowest sensitivity level is set. When you press
and
a second time, the confirmation tone will sound twice
and thereby show that the medium sensitivity level is set. When you
press
and
a third time, the confirmation tone will sound three
times and indicate that the highest sensitivity level has been set.
The original setting is the medium sensitivity level.
This function to set the voltage sensor was also integrated in con-
sideration of the automatic transmission of traffic messages in some
12
