UNIT Mode
46
A small LED bar below the page label "MIX" shows you the volume of the entire MIX signal in stereo.
To cancel the changes made in the mixer, press the MORE button and confirm UNDO. To restore the
changes, press MORE and REDO.
Horizontal View
This view shows only the three currently active FADERs -
with full names. The "+" in the display „+ - -“
below FADER indicates which FADER group is currently selected. Again, you press the middle DATA
button to switch to the next group of three: You will notice that the "+" moves accordingly. To the right of
FADER a horizontal bar meter is depicted, which indicates the level of the output signal.
SAVE
If you have made changes in the UNIT mode, this will be indicated by a
„
?“
next to
SAVE. To make these changes permanent, press the left DATA button. The
„
?“
disappears and the changes are saved. Please be aware that for this the SAVE mode
on the page PREF has to be switched on (see page 60). Should the "
?
" still be there
after you pressed the DATA button, the SAVE mode is disabled.
FADER
With the DATA buttons above FADER, you select which FADER group is active, i.e.
which FADERs can be changed by the three DATA controllers.
Selecting
FADERs
– alternative option
The desired FADER group can also be selected by pressing the pushbutton of the DATA
controller. Push the left controller to select the group KICK/SNARE/HIHAT the middle
controller for the group TOMS/CYMBS/PERC and with the DATA controller to the right you
select the Group FX/LINE/ACMP.
This method is very simple and convenient as you don't need to make sure first which
FADERs are currently active.
Routing and Signal Flow
The DrumIt Five offers a variety of routing options and allows you, through a combination of
internal mixing and direct out channels, to master every imaginable application scenario. The
way the routing in the DrumIt Five works is explained on page 64, based on practical
examples. Once you have understood the signal flow, there are no limits to your creativity.
Summary of Contents for DrumIt Five
Page 16: ...Connections 16 5 Connections ...