UNIT Mode
52
10.4 UNIT
– INTF*
On this page you make the global routing and MIDI settings for each trigger channel. Here you set to
which BUS the respective signals should be sent and the settings for the MIDI control of each channel.
Application examples expanding on this topic can be found from page 64 on.
ZONES
Here you can see how many (sound) zones are assigned to a trigger channel (see
chart on page 14). The number of zones indicates how many MIDI notes are used for
the channel. Please note that for all trigger channels with multiple zones the MIDI notes
are a consecutive sequence that can be shifted, but not separated from each other.
example:
Cymbal 2 has 4 zones and has B4 assigned as MIDI note. Therefore, the MIDI note
sequence for the cymbal 2 is:
B4 = bell, C5 = bow, C#5 = edge, D5 = choke function.
FADER
Select here to which FADER group of the internal mixer (see also mode UNIT Page
MIX on page 45 the respective trigger channel should be assigned. Please note that for
this purpose only the first six FADER groups are eligible, the assignment of the groups
FX, LINE, ACMP is fixed.
CHAN
This sets the MIDI channel for the transmitting or receiving of MIDI signals for the
respective drum channel. You can assign a different MIDI channel (1 to 16) to each
drum channel. The default setting for all channels is the global MIDI channel (see also
menu item MIDI on page 59). This channel is marked with "!" and can be set manually.
To do this, turn the DATA controller to the far right.
Summary of Contents for DrumIt Five
Page 16: ...Connections 16 5 Connections ...