2 EASY
KEYPAD MODULE
Input room number directly, the screen will be showed the room
number,
press to start calling
Input pa”#” to unlock the door.
This section explains the settings of each function, please refer to the
table
s
About the setting mode:
Input the master code to switch to the setting mode, and input the cor-
responding setting code to perform the settings for the function you
want. After settings have been made, input the following setting codes
to continue the setting operation. Press " " to exit the setting mode
Touch sensor
keypad
Call button
MODULES
1. Parts and functions
2. Keypad operation with TFT module
•
Call Residents
•
Password Unlocking
•
Parameters Setting
•
The example is set as cancel button and # as
confirm button,please refer to */# function setting
for detail information
•
Forbid to slide to touch the digital keypad,it may
cause mistaken key,the correct operation is using
your finger to press the digit you desired
• You should press“confirm”button after finish input-
ting the code number each time,otherwise,the
operation will be cancelled automatically in 10s
Setting items
Setting range
Default
value
Setting
code
Reset all settings
1,2,3,4
-
00
Setting the master code
1 ~ 12 digits
Valid keys:0 ~ 9
1234
01
Setting the key
illumination time
10 to 99 seconds/
continually lit
10 sec
02
Setting the unlock time
01 to 99 seconds
1 sec
03
Setting the unlock mode 0:opened/1:closed
opened
04
Operation tone settings
0,1,2
on
05
Reset code settings
1,2,3,4
-
06
&# function settings 0:Normal/1:Reverse
Normal
07
Call tone settings
0:Enable/1:Disable
Enable
08
Interference resistant
grade settings
Valid keys:0 ~ 5
2
09
SPK Adjustment
Valid keys:0~9
5
11
Night light level
Valid keys:0 ~ 5
4
13
Reserve
Reserve
Reserve
14~17
Setting the code
forTemporary1
1 ~ 12 digits
Valid keys:0~9
-
18
Setting the code
forTemporary2
1 ~ 12 digits
Valid keys:0~9
-
19
Setting the code
for user group1
1 ~ 12 digits
Number of codes:40
Valid keys:0~9
-
20~59
Setting the code for
user group2
1 ~ 12 digits
Number of codes:40
Valid keys:0~9
-
60~99
Mounting
screw
DMR21 Technical M
a
nu
al
-6-
