Nortek Security & Control | 1950 Camino Vida Roble, Suite 150 | Carlsbad, CA 92008-6517 | USA | 800-421-1587 | www.nortekcontrol.com
Copyright © 2016 Nortek Security & Control LLC.
4
Calling the System
1.
Dial the number of the premises.
If an answering machine is present at the premises: Let the line ring once, hang up, and call again.
If an answering machine is not in use at the premises: Wait until you hear a continuous tone, indicating that the system has answered the call.
2.
After the tone, enter the 2-digit remote access code.
3.
Enter your user code and press
#
.
4.
Choose an option from the Operations menu.
Operations Menu
The Operations menu announces options and instructions on how to remotely use system functions. The options in the Operations menu vary according to system
status and your access rights.
The following is a list of remote operations options:
Description
Action (remotely by telephone)
To set all partitions
Press
1
and press
1
.
To set a selected partition
Press
1
, press
9
, and then enter the partition number.
To un-set all partitions
Press
2
and press
2
.
To un-set a selected partition
Press
2
, press
9
, and then enter the partition number.
To change Zone Omit stats
Press
3
, enter the zone number, press
#
, and press
9
.
To change Follow-Me numbers
Press
5
, enter the Follow-Me number, press
#
, and press
2
.
Enter the new phone number, press
#
, and press
1
.
To listen in to the premises
Press
6
and press
1
.
To talk to the premises.
Press
6
and press
2
.
To listen in and talk to the premises
Press
6
and press
3
.
To record messages that are not included in the message bank (5 messages) Press
7
and press
1
–
5
.
To record an opening message
Press
7
and press
6
.
To exit the system
Press
0
.
To return to the previous menu
Press
*
.
To repeat the menu options
Press
#
.
Operations Menu
2GIG® Vario System
2GIG Vario Voice Module
10012671 A
