2GO 797210, Operation Instructions Manual

Pairing the headset with a Bluetooth phone 

Make sure that the headset is turned off and that the distance between the headset and the 

phone is no more than one meter. Then activate the Bluetooth function on the phone. Remove 

the two earphones from the charging box to turn them on. Wait for about 10 seconds - The 

earphones will now pair automatically. The headset then automatically switches to pairing 

mode so that the connection to your mobile device can be established. Open the Bluetooth 

settings of your mobile device and search for new devices. Select “2GO Deluxe“ to establish 

the connection. 

If the Bluetooth connection to your phone has been interrupted, it will be restored automatical-

ly as soon as you switch the headset on again within the operating range.

Answering a call 

When a call comes in, you hear a ring tone. You have two options to accept an incoming call: 

Method 1: Press the Power button once. 

Method 2: Accept the call via your telephone. 

Ending a call 

You have two options to end a call: 

Method 1: Press the Power button once. The message (on-hook) sounds. 

Method 2: End the call from your phone. 

Rejecting a call 

Press and hold the Power button for two seconds to reject a call. A message sounds (call 

rejected).

Redialing

In STANDBY or MUSIC MODE, press the Power button twice to automatically redial the last 

number dialed on the phone. The headset automatically calls the last contact dialed (callback). 

Music Play/Pause 

In STANDBY MODE, briefly press the Power button once to start playing music. 

In music playback mode, briefly press the Power button once to pause music playback. 

Select music 

Press the Power button twice on the right side to play the next song. 

Press the Power button twice on the left side to play the previous song. 

Voice control 

Press the Power button for 1 second on the left side to start the voice control on the mobile 

phone.

Resetting the headset 

In Power OFF, press the Power button for about 10 seconds. The headset switches to Power 

ON after 2 seconds. After a further 3 seconds, the headset switches off again and the status 

LED flashes red 4 times. After a further 5 seconds, existing couplings are deleted, the status 

LED flashes red/blue twice.