2GO 797211, Operation Instructions Manual

EN

 User Manual Bluetooth Headset

Bluetooth headset should be used with the compatible devices which support Bluetooth wire-

less technology.This allows you to make calls and enjoy the music streaming at any time freely. 

Please read this user manual carefully before using the headset, and also read your device’s 

user manual regarding the Bluetooth function, and pay attention to those important safety and 

maintenance information. Please keep the headset away from children. 

Status LED Information Earphone

Pairing mode

The status LED of the right earpiece flashes alternately red and blue when the headset is in 

pairing mode.

Standby mode after successful pairing

The status LED of the right earpiece flashes blue every five seconds when the headset is con-

nected and not in use.

Call mode

The status LED of the right earpiece flashes red once every five seconds when a call is being 

made.

Charging mode Headset

The earphone status LED lights red while the headset is charging. When charging is complete, 

it goes out.

Switch on

After switching on, the status LED flashes blue.

Switch off

After switching off via the power button, the status LED flashes red.

Charging mode Charging box 

The charging status indicator on the charging box lights blue while the headset is charging. 

When charging is complete, the status LED goes out. 

Charging the headset 

Remove the protective film from the contacts of the two earphones. 

Place the headset in the charging box and close it. 

The charging status indicator on the charging box lights blue while the headset is charging. 

When charging is complete, the status LED goes out. 

Please fully charge the headset battery before using the headset for the first time. The headset 

is fully charged in approximately two hours. 

Please charge the headset in time as described above to extend the battery life. (If the headset 

has not been used for a long time or the battery is completely depleted, it will take a few 

minutes for the indicator light to work.)

Charging the charging box 

Connect the supplied type C-USB cable to the charging socket of the charging box and to a USB 

charger or PC. While the charging box is charging, the status LED lights up blue. The charging 

status is indicated by the blue dots.

Turning on the headset 

Method 1: To turn the headset off (Power OFF) on (Power ON), press and hold the Power 

button for 2 seconds until the blue light is displayed. 

Method 2: The headset turns automatically on when it is removed from the charger.