>6
3
Setting of self-established program
Set 7-days self-established program as well
as the control temperature for each period.
Copy the program for one day
、
：
，
；
，
，
，
；
；
：
（
）
，
；
，
，
，
。
，
，
A. Set the function change-over switch to
position
and screen appearance display area
shows the program setting icon
.
B. The icon and number showing the weekday flash, and press
key or
key to adjust
the date numerical value, press
key to confirm and then move to next setting
C. At this time
the cursor from zero point to 1 and the original temperature setting mode
( the temperature mode icon on the left of the temperature number ) begin to flash, press
key or
key to select the temperature
press
key to confirm
and then the
temperature mode display for this one hour period will be changed into the selected
temperature mode (Double solid frame for the comfortable temperature, single solid
frame plus single hollow frame for the economic temperature, double hollow frame for
the antifreeze temperature), and move to set next one hour temperature
D. Repeat the steps above until complete to set all temperature modes in 24 hours, then
return to the date selection mode, and keep pressing
key for a long time at the
program setting mode for every hour can quit from the temperature setting for the
rest time period. Enter into the date selection mode directly again, the rest unset part of
temperature will remain as the original default temperature or the temperature set before;
E. When the date cursor starts flashing again, it enters a new setting cycle for some day
F. Finish the temperature setting, the same as the F Clause in "Setting of date and time"
The modified time/temp erature program will be remembered as the customer's
self-established program. When the function change-over switch returns to AUTO, the
controller operates the customer's self-established program and
and
program
symbols will be displayed at the working mode display area in order to distinguish from
the ex-work preset program.
After entering a day program you can copy this into another day to save time when
creating a weekly program: For example, if you want to copy the program of Monday to
Thursday, the methods are as follows:
A. Select the program for Monday: With the selector on "AUTO PROG", press
key or
key
The outer frame for Monday flashes
to select Monday
and press
key
for 3 seconds until the
word appears on the screen
B. Copy to Thursday: While pressing
key constantly, press
key or
key at the
same time
and select to Thursday, then release
key or
key
then release
key
to finish the copying
and the
word disappears
At this time
the Thursday
cursor flashes
the setting of the day can be continued through
or
key as well as
the
.
C. Copying for other days, please repeat from the Step A to B.
Setting...
