6
Edge binding
part 1 of 2 parts: Body:
Fold the edge binding
in half, position body inside the binding at the fold. Use a
narrow zig zag stitch with black thread. Stitch close to the
edge. Edge bind the head and the tail as shown in diagram 2
and the photo below.
(Head) Spine loop
80# test line.
Position the 6.5 cm spine loop on
top of the reinforcement on the
FRONT
of the kite. Stitch in place
securely. See Diagram 3. (1)
(Tail) Spine line
80# test line. Position the 30 cm spine line on top of the reinforcement on the
