![background image](http://html1.mh-extra.com/html/2m-technology/2mt-7232-series/2mt-7232-series_user-manual_3079875036.webp)
Playback
HD TVI Hybrid DVR User Manual
31
7.5.1 Snap Settings
Manual Snap
In the live view mode, right click to dispaly the menu toolbar. Then click
on this menu
toolbar to capture the picture.
Auto Snap
Go to Main Menu
Setup
Record
Snap as shown below. You can set auto snap here.
①
Set resolution, image quality, snap time interval and snap number.
②
Click “Apply” to save the settings. The system will automatically capture pictures
according to the setup.
Taking Snapshots on Motion Alarm
①
Go to Main Menu
Setup
Alarm
Motion. Enable motion alarm and then set the motion
detection area (see
Chapter 9.2
for details).
②
Go to alarm handling setting by click “Setting” button under Trigger. Then checkmark the
snapshot channel and click “OK” button to confirm the settings.
③
Set schedule for motion alarm. The setting steps are similar to normal schedule recording
(See
Chapter 6.3 Schedule Recording
④
Click “Apply” to save the settings. The picture will be automatically captured once a
motion alarm happens.
Taking Snapshots on Sensor Alarm
Some models may support this function.
①
Go to Main Menu
Setup
Alarm
Sensor. Enable sensor alarm and choose the sensor
type.
②
Go to Alarm Handling tab. Then click “Setting” button under Trigger. An alarm trigger
box will pop up. Then select the snapshot channel and click “OK” button to confirm the
settings.
③
Set schedule for sensor alarm. The setting steps are similar to normal schedule recording
(See
Chapter 6.3 Schedule Recording