background image

Body Temperature Measurement – 

Quick Guide

 V 6.1 

Disclaimer

 

The infrared temperature measuring device is the human body surface temperature 
screening instrument. The test results only re

fl

ect the real-time temperature evaluation 

of objects or people in a speci

fi

c environment. The selling company and the manufacturer 

shall not bear any responsibility for the direct or indirect loss caused by the use of the test 
results.

 

Installation precaution

 

1. It is recommended to install it indoor free from wind. The cold wind might in

fl

uence the

accuracy in windy outdoor. In this case, we have to increase the environment temperature
compensation, 5° C per time.

2. The temperature measurement area should be protected from sunlight to avoid high results.
3. When it is used outdoor under special circumstances, build a shed on site. The height of

the shed should be more than 2.4m (7.87ft) to ensure the stability and free from wind.
People walk slowly through it to measure the temperature.

Temperature measurement module

 

Temperature sensor:

 

Real time infrared thermo sensor to detect temperature, 
ready in 30 seconds after power on.

 

Distance sensor:

 

The distance sensor starts working when a person or 

object is in 20cm (7.87” in) to it. If the temperature of person 
or object detected is 

≥ 

35.5 

, the voice "Normal 

temperature" is trigged; if it's lower than 35.5 

, or higher 

than the set value with alarm, the voice "Please check 
again" is trigged.

 

When the ambient temperature is lower than 15 

, if the 

temperature of person or object detected is 

≥ 

34.5 

, the voice 

"Normal temperature" is trigged; if it's lower than 34.5 

, or higher 

than the set value with alarm, the voice "Please check again" is 
trigged.

 

Special attention: the distance sensor shall not be blocked, 
otherwise it will repeat the voice broadcast.

 

Power Light:

 

The indicator light is on when the temperature measurement 
module is working. When measuring the forehead temperature, 
the measured result is the most accurate when the middle of 
human eyes is right facing the temperature indicator.

 

Temperature Measurement

 

Power Light

 

Power Light

 

Distance sensor 

Temperature sensor

 

Sketch Map

 

Summary of Contents for 2MTHWT-HMD













Reviews: