2N TELEKOMUNIKACE a.s., www.2n.cz
26/92
2.6 RESET Button Function
The RESET button located on the
bottom side is used for factory
2N EasyGate IP
®
default reset or restart of the device.
Factory Default Reset
To reset the factory default values, press and hold the RESET button for
approximately 20 seconds until the separate red LED indicator in position 1 among the
signal LEDs goes on.
Now release the RESET button to reset the factory
default values. While the RESET button is being pressed, the blue power LED indicator
is on.
Restart
To HW restart the device, press the RESET button shortly. The HW restart is indicated
by a white power LED.