2N TELEKOMUNIKACE a.s., www.2n.cz
78/92
6.2 SIP Calls
SIP is a service which provides calls via the Internet. Data has to be permitted for SIP
calling.
Enable SIP calls in the SIP / Basic Settings menu by turning on Service and save the
setting. Complete the phone number and authorization ID if different from the phone
number. Enter the password paying attention to the lower/upper case. Complete the
SIP server address. If 0 is set by default, the setting is same as in 5060.
This is the way to SIP registration. Check the SIP status on the SIP / Basic Settings
card or the Status card, which provides general information on the device.