![background image](http://html.mh-extra.com/html/2n/ateus-501106e/ateus-501106e_user-manual_439806043.webp)
41
6.5.7. How to Run Remote Supervision
1. Run the GSM program on the Remote Supervision Centre PC.
2. Click on this icon to open the list of supervised GSM gateways.
3. The list may include subfolders in multiple levels.
4. Click on this key to create a subfolder.
5. Click on this key to create a new item in the list.
6. Enter client's name, company etc. here.
7. Enter the respective GSM gateway telephone number here.
8.
WARNING!
Settings here must correspond with the respective GSM gateway setup in order
that the remote supervision connection can be established successfully!
9. Click on this key to save the record in the list.
10. Click on this key to establish remote supervision through your modem.
11. Click on this key to establish remoter supervision through your GSM gateway.
Important cautions:
•
Connection establishing is the quickest without call-back or with a GSM – GSM connection
made within one and the same GSM network, which usually takes only a few seconds. With
call-back and different GSM operators, the establishing may take up to several minutes.
•
With call-back, the PC does not check whether the call-back comes from the GSM gateway you
sent the request to. Hence, if you, e.g., try to establish connection with one GSM gateway and
cancel the attempt before getting through, and then you try to make connection with another
GSM gateway, you should make sure from which of the gateways the call-back is coming!
1
2
3
4
5
6
7
8
9
11
10
Summary of Contents for ATEUS 501106E
