Configuration Tool
3.4
101
o
SIM # - the SIM cards in position # will only be used in the selected
GSM group. In this case, the
Maximum called minutes
and
Disconnect call
parameters are disabled.
o
By time – the SIM card will be switched according to the
Time of use
parameter and call timer limitations.
o
Random – the SIM card will be switched randomly at defined time
intervals and according to call timer limitations.
o
By time then SIM card 1 – the SIM card will be switched according to
the
Time of use
parameter and call timer limitations. When all SIM
cards on a selected wireless engine are discharged, the system will
switch the wireless engine back to the SIM card in position 1.
o
Random – the SIM card will be switched randomly at defined time
intervals and according to call timer limitations. When all SIM cards on a
selected wireless engine are discharged, system will switch the wireless
engine back to the SIM card in position 1.
Note
For SIM card (SIM holder) placement on the GSM / UMTS board refer to
Subs. 2.1 – GSM / UMTS Board.
Last searched SIM
Define the number of SIM holder positions to be checked for SIM by the
gateway after the GSM / UMTS board start/restart. The SIM card holders that
were not tested have the (undef) status in the diagnostics window of the
configuration tool.
Disconnect call
Set the rules for automatic disconnection of outgoing calls to a wireless
network:
o
SIM limit exceeded – automatic call disconnection when the active SIM
card call limit is exceeded.
o
Switch to another SIM – automatic call disconnection when the active
SIM card time of use is exhausted.
o
No ALERTING before CONNECT – automatic call disconnection when the
gateway receives the call connect message without alerting.
Day of deleting stats in group
Enable deletion of call statistics over a selected GSM group on a selected day
of each month.
SIM settings
Select which settings will be used for the SIM cards in positions 5 – 8:
o
SIM 5-8 is SIM 4 – all settings for the SIM cards in positions 5 – 8 will
be the same as those for the SIM card in position 4.
o
SIM 5-8 is SIM 1-4 – all settings for the SIM card in position 5 will be
the same as those for the SIM card in position 1. The SIM card in
position 6 will use settings of the SIM card in position 2, SIM 3 = SIM 7
and SIM 4 = SIM 8.
Disable tone detection
Deactivate the alerting tone detectors on the GSM / UMTS boards. Used for
Summary of Contents for BlueStar
