2N TELEKOMUNIKACE a.s., www.2n.cz
119/152
&S – view aux, bris, modules status
&S## – view aux, bris, one module status (ax,px,ex,0..1)
&S=info – view all modules selected info (by at&S##)
&Q## – view signal quality on module 0..1
&QALL – view signal quality on all modules
&L – view logfile from recent <SPACE...continue>
&C – view buffer (calls) from recent <SPACE...continue>
&CR – read buffer (calls) from the oldest <#...erase & continue>
&CS – view buffer (SMS) from recent <SPACE...continue>
&CSR – read buffer (SMS) from the oldest <#...erase & continue>
&BSYS=cmd – cmd for system (RESET)
&XG – view conn table/gsm (call states)
&XG## – view call details for gsm channel)
&M0 – disable ansi colors
&M1 – enable ansi colors
&M9 – start matrix
&U – view logged users
&I## – view gsm moninfo (dBm = signal level whn registering with BTS,
RxLEV = minimum signal level required by BTS for registering of GSM module)
Configuration AT Commands
System Settings
%S85=sms – no answer sms text (max 63 chars)
%S90=mode – operating mode of GSM module allocation
(0=cyclic mode, 1=locked mode, 2=smart mode – according to already
called minutes)
(for 0 and 2 set LCR group = 3 (any))
%S91=buf,id – cdr mode (b0=outg, b1=inc, b2=failed, b3=moninfo)
unit id (0=off, 1..255)
%S92=rep – report mode (b0=states, b1=tstamp, b2=smp, b3=lay2, b4=select)
%S98=pin – sim pin (max 7 digits)
%S99=
.yy.w/hh:mm:ss
dd.mm
– set date/time (w=1..7 day of week)
%X10=tsec – external routing tout in sec/10 (5..60,255)
%X20=mmdd,mmdd – date of hour+1,hour–1 time change (0=off,0101..1231)
%X22=hh:mm – 0:01..23:59...time of reset of GSM gateway, 0:00 – no reset
%X80=login/pass – login name / password (max 15 chars all)
