2N TELEKOMUNIKACE a.s., www.2n.cz
33/152
With multiple GSM gateways, the connection lay-out is as follows:
2N ® BRI Enterprise Connection as DialThru Router
This type of connection saves one BRI port to the PBX. Incoming PSTN calls are
treated by the GSM/UMTS gateway in the DialThru mode while outgoing calls are
routed according to the LCR table.
The figure below shows the gateway as a DialThru router for the Point-to-Multipoint
extension. Calls are routed automatically into GSM, UMTS or ISDN based on the
internal LCR rules.
