2N TELEKOMUNIKACE a.s., www.2n.cz
64/152
5.1.2 Gateway Configuration
System Parameters
General
Saving call data (CDR) – define the call types for which the GSM gateway shall
store information in the CDR.
Gateway ID – provides
gateway with a numerical code in the CDR in
2N BRI
®
case multiple devices generate CDRs in the network.
Number for remote control.
System Restart
Enable system restart – enable/disable the feature.
Time of system restart [hh:mm] – set the time for system restart.
Note
If there are active calls, restart will be executed 10 seconds after the end
of the last call.
Mobility Extension (DTMF settings)
Start dialling (quick call forwarding) – set the DTMF code for quick call
forwarding start.
End dialling (quick call forwarding) – set the DTMF code for quick call
forwarding end.
Hold call – set the DTMF code for the current call holding.
Hang up call – set the DTMF code for the current call termination.
'Follow me' activation – activate the
function to make the GSM
Follow me
gateway start routing calls to the defined GSM/UMTS user number. The default
value is *55.
'Follow me' deactivation – deactivate the
function. The default value
Follow me
is #55.
'SMS at no answer' activation – activate the
function for a
SMS at no answer
registered user. The default value is *33.
'SMS at no answer' deactivation – deactivate the
function for a
SMS at no answer
registered user. The default value is #33.
