2N TELEKOMUNIKACE a.s., www.2n.cz
65/152
Tip
Activate/deactivate the
and
functions by
SMS at no answer
Follow me
dialling the above mentioned DTMF access codes into the GSM gateway
from a registered mobile user number. You can change the function
values via the configuration interface too (see below).
Others
PIN – set the PIN code for the PIN–secured SIM cards.
Caution
A PIN–active SIM card with a PIN value other than that set in the GSM
gateway configuration will be blocked by the gateway with the 'pin–err'
cause. Enter the correct PIN on your mobile phone to unlock the SIM
card!
End of dialling (empty=off) – set the DTMF code for DTMF dialling end for DISA
incoming calls. The default value is „#".
List of emergency numbers
The window displays a list of emergency numbers, which are normally routed to the
BRI interface. If the BRI line is disconnected, the emergency numbers are dialled
automatically via any GSM/UMTS module according to the following rules:
Search of a logged-in GSM/UMTS module (regardless of free minutes);
Search of a blocked or network searching GSM/UMTS module.
The table includes an exact format of the number to be called (112,911, etc.). The 'x
'
placeholder stands for any digit in the number to be called. The ' }'_ placeholder
{
means the rest of the number. For example:
Format
Allowed numbers
123
123 only
14x0
1400,1410,1420,…1490
999_
All numbers starting with 999
