2N TELEKOMUNIKACE a.s., www.2n.cz
87/152
Table of accepted prefixes
List of prefixes of called destinations to which the selected prefix list applies.
Note
The maximum count of records in the
is 138
Table of accepted prefixes
for each prefixlist.
The maximum table record size is 9 characters.
LCR Table
Table of outgoing Least Cost Routing (LCR) rules. Every outgoing call from the source
interface is routed to the destination interface according to this table. For a call, the
gateway checks the lines and if the called number prefix matches the prefix in the
selected network list and the current time value is within time limitation limits, the call
will be routed via the defined GSM group(s) or BRI 1/BRI 2/VoIP interface.
From (channels/groups) – source channels or groups via which calls are routed
to
gateway.
2N BRI
®
GSM ALL – any of the GSM incoming groups can be used for call routing.
GSM GRP1-2 – define one GSM incoming group or a range of GSM
incoming groups via which call routing will be enabled.
BRI1 (pxx,P) – any of the BRI1 channels can be used for call routing.
BRI1 (p1-2) – define one BRI1 channel or a range of BRI1 channels via which
call routing will be enabled.
BRI2 (exx,E) – any of the BRI2 channels can be used for call routing.
BRI2 (e1-2) – define one BRI2 channel or a range of BRI2 channels via
which call routing will be enabled.
VoIP (vxx,V) – calls are routed via the VoIP interface.
Prefix list – prefixes to be used for a selected LCR row. Set up to 16 prefix lists.
Prefixlist 1-16 – call routing will obey the rules set in Prefix list 1-16. The
count of digits to be dialled is governed by the Prefixes setting.
All prefixes – all the prefix lists are permitted. Prefix lists 1-16 will be
searched from 1 to 16. The first match will be used routing. For incoming
GSM calls, the Count of digits from the GSM incoming group parameter will
be applied.
Number of digits – all the prefixes are permitted. Routing is only limited by
the count of digits to be dialled.
Time limitation – time validity limitation for a selected LCR row.
Weekend usage – enable/disable a row on weekends.