2N® EasyGate IP User Manual
9
/
94
•
•
•
•
•
•
•
•
•
Install
2N
®
EasyGate IP
with respect to the signal strength – check the LED indicator status
or display the information in the device web interface.
Place
2N
®
EasyGate IP
out of range of sensitive devices and human bodies for
electromagnetic interference reasons. The installed device is intended for permanent
operation with the minimum separation distance of 20 cm from the user.
For the allowed range of operating temperatures refer to Section
2N
®
EasyGate IP
may not be operated on sites exposed to direct solar radiation or near
heat sources.
2N
®
EasyGate IP
is designed for indoor use. It may not be exposed to rain, flowing water,
condensing moisture, fog, etc.
2N
®
EasyGate IP
may not be exposed to aggressive gas, acid vapors, solvents, etc.
2N
®
EasyGate IP
is not designed for environments with high vibrations such as means of
transport, machine rooms, etc.
Make sure there is enough free space above and under
2N
®
EasyGate IP
for cabling and
flowing air to conduct heat away.
An improper placing of
2N
®
EasyGate IP
or the antenna near television, broadcasting or
other high-frequency sensitive devices may have an adverse affect on their functionalities.
2.2 Mechanical Installation:
2N
®
EasyGate IP
is designed for mounting on a vertical surface using a DIN rail bracket (35 mm)
or a wall bracket using screws fitted to the bracket mounting holes.
•
Caution
Make sure that you have all equipment necessary for putting
2N
®
EasyGate IP
in
operation (SIM card, analog phone or PBX FXO port or USB-C cable for device-PC
interconnection).
•
Warning
Only vertical mounting with the connectors heading down guarantees that the
device is waterproof. If installed otherwise, the device may be infiltrated with
water and damaged irreversibly!!!
