2N TELEKOMUNIKACE a.s., www.2n.cz
203/377
1.
2.
3.
4.
5.
6.
4.7 Intercom Function
ALARM – Intercom Calls
Press the
ALARM button on any audio unit (except for the machine room
audio unit set as the control centre) to start the process. Upon the press, 2N
®
calls the pre-set machine room – control centre audio unit.
Lift8
Press
or
(for longer than 2 s) to answer an incoming call.
When the call is answered by the operator, the
system announcement
2N
®
Lift8
will be played.Then, voice connection with the calling audio unit is activated.
Press 1 on the machine room audio unit keypad to confirm the received call
manually. If Confirmation by pick-up (011–016=2) is configured, it is unnecessary
to confirm the call with DTMF1 (refer to Tone Dialling Control during Call – Long
for details).
Command List
The call is time-limited (by the "Caution, the call is ending” message), but can be
prolonged using button 4.
Press
, 5 or # to terminate the call.
Caution
You cannot set up an alarm call to another control centre from the
machine room audio unit that is configured as the control centre. The
call is made to the audio unit that is the last to activate the alarm call. If
no alarm call was activated on any audio unit, the machine room audio
unit will not call any unit.
Press
on the control centre audio unit to set up a call to the audio
unit that is the last to activate the ALARM function. Such a call is
processed as TRIPHONY and can be terminated by pressing the
TRIPHONY
button on any of the two audio units or pressing and
holding the
button for longer than 2 s on the machine audio unit.
If a call is set up to a non-existent machine room audio unit, the Alarm
function will not be activated (valid for settings #9, #0). If more
numbers than one are pre-programmed, the non-existent audio unit is
skipped.
Summary of Contents for Lift8
