2N Lift8 User Manual Download

Page: 287 / 377

2N TELEKOMUNIKACE a.s., www.2n.cz

287/377

Local Plan

If you have set a storage, added a plan and set the plan in the General menu, the plan

will appear in the

menu. Use the sliders to find the intercom location and

Local Plan

move the intercom onto the map with the left button. See the intercom default

position in the new plan in the left-hand upper corner. The plan also displays other

intercoms in the building including colour states: orange indicates the intercom that is

being configured, green means another functional intercom and red denotes a

defective intercom that failed to make a check call within the timeout. A phone

number is displayed for each intercom too. Select an option in the Available plans to

change the intercom plan. Click Save to confirm the settings.

Intercoms – Local Plan Menu

Export

The table export function is available in the Intercoms – Users – Calls menu. To enable

the function, click Export or use the context menu displayed with the right mouse

button above the selected object or objects if multiselect is used in the Intercoms –

Users menu. In the Calls menu, the export function is only available in the context

menu and always exports the whole table for which export was activated. In the

Intercoms – Users menu, you can only export selected objects via the context menu

and if you want to export all the objects, click Export. Having pressed this button, you

have additional checkbox options: select the items to be exported and click Export in

the form to confirm your selection. If you choose export of assigned users, a list of the

Summary of Contents for Lift8


























































































































































































































































































































































































Search results

Summary of Contents for Lift8

Reviews:

Related manuals for Lift8

Brands by name

Popular brands

2N Lift8, User Manual

Search results

Summary of Contents for Lift8

Reviews:

Related manuals for Lift8

Brands by name

Popular brands