2N NETSTAR – User Manual
F x nn
F=FLASH, x is the PSTN/PS access code and nn is the subscriber number of the
transferee.
2.2. Return to Transferred Call
This is an advanced option of the call transfer service without hang-up. If you
have transferred a call and have not hung up, you can return to the call unless the
called subscriber has answered or you have hung up. To return to the transferred call
press
FLASH
again.
If the called subscriber has answered the transferred call, the
CALL ALTERNATION
service can be used.
2.3. Call Alternation
This is an advanced option of the call transfer service without hang-up. The
moment you have established calls between the calling subscriber and the transferee,
you can alternate the two calls, the inactive call getting music on hold. To alternate
calls, press
FLASH
again.
2.4. Call Forwarding
If you do not want to or cannot speak to the calling subscriber, you can forward
the call to another subscriber selected by you without answer. The service is only
available to users equipped with a 2N StarPoint telephone.
2.5. Call Hold - Temporary Call Suspension
To suspend a call for some time (to seek advice or retrieve data, etc.), press
FLASH
on your telephone; the calling subscriber hears music,
do not hang up
. The call is
held temporarily and the PBX signals this status. You can also use the
HOLD
button
on your telephone, then all is controlled by the telephone logic; you cannot hang up
after that in most cases.
v
1.1
12
Summary of Contents for Netstar
Page 1: ......
