2N TELEKOMUNIKACE a.s., www.2n.cz
112/143
Configuration commands
Status Information
AT&V – Overview of all system settings
AT&VI – Overview of ISDN PRI settings
AT&V0 – Overview of basic GSM settings
AT&V# – Overview of GSM group # settings (#=1-8)
AT&VB - Overview of module assignment to groups
format: B#=grpout, grpin
# is the module number
grpout, grpin - outgoing and incoming groups of module
AT&VALL – Overview of all GSM group settings
AT&VE – Overview of VOIP parameters
AT&N# – Overview of parameters of network list # (#=1-8)
AT&NALL – Overview of parameters of all network lists
AT&R – Overview of LCR lines
Default Reset
AT&FRES – Reset with gateway factory settings
System Settings
AT%S70=x.x.x.x – IP address
AT%S71=x.x.x.x – IP address mask
AT%S81= – Initialisation string for setting of mode connected to the gateway
COM2
AT%S90=x – Type of assignment of B-channels to GSM modules and X
0 – rotating
1 – locked
2 – according to credit
AT%S91=x,y – Way of call information recording
X:
0 – no record
1 – successfully connected outgoing call
2 – successfully connected incoming calls
3 – successfully connected incoming and outgoing calls
5 – all outgoing calls
