2N TELEKOMUNIKACE a.s., www.2n.cz
63/143
Ri
– select right type of ringing profile (pattern, voltage, frequency) –
ng profile
(according to region where is the gateway installed)
Tone profile – select right type of ringing tone (according to region where is the
gateway installed)
Call ID profile – select right type of Call ID profile (FSK mode) – (according to
region where is the gateway installed)
Functions
Day of deleting statistics (every month) – the day of automatic deletion of call
statistics on the VoIP interface. None = no deletion
Tariff pulse type (metering) – possibility to set-up metering pulses sending
(Disabled/12kHz/16kHz)
FXS line selection for incomming calls – selection of destination FXS line(s) in
case of incomming calls from VoIP or wireless networks
DTMF detector during call enabled – enables/disables DTMF detection during
connected call
Caution
Internal CLIPs for FXS ports are: FXS0–100; FXS1–101; FXS2–102; FXS3–
103
Volume settings
Analog to digital gain [dB] – Voice processing settings
Digital to analog gain [dB] – Voice processing settings
GSM Basic Parameters
GSM selection
Assignment of GSM-channel
Cyclical
Locked – peer to FXS channel
Smart – least used minutes
Smart – most remaining minutes
Linear – always first free module