2N TELEKOMUNIKACE a.s., www.2n.cz
85/143
Caution
0=off means disabled expiry, i.e. records are saved into the AutoCLIP
routing table for an indefinite period of time. Therefore, make sure that
the routing priorities are set properly for incoming SMS. Refer to
for details.
Incoming SMS routing
Detection of Delivery Report
Number of digits (1-20) from the right – set a count of digits to be detected from
the SMS text end in the case of positive evaluation according to Begin of text of
received SMS. The found number is compared with the addressees of the
outgoing messages.
Begin of text of received SMS – any SMS whose text beginning matches this
parameter is evaluated as a delivery report.
Note
If multiple SMS are sent to one and the same number, delivery reports
are assigned to them according to the sending time, starting from the
oldest one.
Modules to SMS groups assignment
This section helps you assign GSM modules to SMS groups (according to the GSM
provider, e.g.) to facilitate incoming/outoging SMS routing.
SMS groups to User groups assignment
This section helps you assign SMS groups to User groups for SMS sending/receving
purposes. The GSM gateway can contain up to four User groups.
