60
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Basic settings
GSM network ID
– name the prefix list for convenience.
Default count of digits
– the default length of the number to be dialled into
GSM/UMTS when routing via the selected prefix list. Use this parameter if the
parameter is not included in the
table.
Digits count
Accepted prefixes
Table of replaced prefixes
This table helps you change the prefix of the number received (from 00 to +, e.g.). You
can just add or remove a prefix using this table. This change is performed before the
prefix table search is initiated. Keep the „"/ „" record at least in the table for a proper
function.
Table of accepted prefixes
A list of prefixes of called destinations to which the selected prefix list applies.
LCR Table
Table of outgoing Least Cost Routing (LCR) rules. Every outgoing call from the source
interface is routed to the destination interface according to this table. For a call, the
gateway checks the lines and if the called number prefix matches the prefix in the
selected network list and the current time value is within time limitation limits, the call
will be routed via the defined GSM group(s) or VoIP interface.
From (channels/groups)
– source channels or groups via which calls are
routed to
.
2N
VoiceBlue Next
®
GSM ALL
– any of the GSM incoming groups can be used for call routing.
GSM GRP1–4
– define one GSM incoming group or a range of GSM
incoming groups via which call routing will be enabled.
VoIP (vxx,V)
– calls are routed via the VoIP interface.
Prefix list
– prefixes to be used for a selected LCR row. Set up to 16 prefix lists.
Note
The number to be dialled to the GSM/UMTS network must meet the
condition.
Count of digits
For
calls, the count of digits to be dialled must be equal to or higher
VoIP
than the value set in the
.
Count of digits
Note
The maximum count of records in the
is 14
Table of replaced prefixes
for each prefixlist.
The maximum table record size is 9 characters for the prefix and 9
characters for the replaced number.
Note
The maximum count of records in the
is 138
Table of accepted prefixes
for each prefixlist.
The maximum table record size is 9 characters.
