62
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Call duration limit
– set the maximum call duration (minutes).
Mobility Extension
The table registers the Mobility Extension users.
Name
– enter the user name for calling to VoIP.
User
– enter the registration user name for VoIP.
Password
– enter the registration user password for VoIP.
GSM number (CLIP)
– enter the user SIM card CLIP.
Follow me function
– enable/disable call forwarding to a mobile user station
(based on CLIP).
SMS at no answer function
– enable/disable sending of information SMS on
missed calls.
Ethernet configuration
This window helps you configure the Ethernet interface of your gateway.
Use DHCP
– enable/disable the DHCP client function in
.
2N VoiceBlue Next
®
IP address
– the fixed IP address (v4) of the
Ethernet
2N VoiceBlue Next
®
interface.
Subnet mask
– the subnet mask for the
Ethernet
2N VoiceBlue Next
®
interface.
y – The IP gateway IP address (v4) in the Ethernet network.
Default gatewa
– primary DNS server.
DNS server1
DNS server2
– secondary DNS server. Used as a back-up when DNS server 1 is
not functional.
Tip
CallBack detects the CLIP from right to left. Thus, configure 10 rules for all
the incoming CLIPs to make CallBack work properly. Each of the rules
must contain one of the CLIPs: 0,1,2,3,4,5,6,7,8,9.
Note
Remember to activate the CallBack mode in the
GSM incoming groups
window for a proper CallBack function.
The maximum count of CLIP routing table records is 96.
Note
You are recommended to read the Mobility Extension section on page
carefully before using the Mobility Extension function.
Caution
Incorrect settings, e.g. enabling the
service, may result in a
DHCP client
denial of access to the
configuration. To avoid this,
2N VoiceBlue Next
®
restore the GSM gateway default settings. Refer to
for details.
Subs. 3.1
