2VV.
Creating innovative solutions for you and your business since 1995.
PLEASE NOTE!
The cable should not be routed together with the power cable, and should be at a sufficient distance from it.
• See that the connectors click when connected.
• When fixing the cable to a wall, etc. the insulation must not be compromised.
• If the cable is not connected immediately after installing the controls and screens, put electrical tape on its end
or the connector to prevent mechanical damage or short-circuit.
• The cable connector must not come into contact with water or other liquids.
- plug the other end of the cable to one of the connectors of the electronic board
BOOST
EXT
1.
3.
5.
2.
4.
6.
CANL (30)
CANH (29)
+12V (27)
GND (28)
A
Control panel
TECHNICAL INFORMATION
